KitchenAid 30" Range Hood with the FIT System Guia Da Instalação

IMPORTANT: Clean the hood and grease filters frequently 

according to the following instructions. Replace the grease 

filter before operating hood.

IMPORTANT: Do not use soap-filled scouring pads, 

abrasive cleaners, cooktop polishing creme, steel wool, 

gritty washcloths, or paper towels.
To avoid damage to the stainless steel, do not use cleaners 

that contain chlorine.
Cleaning Method:

 

■

Liquid detergent or all-purpose cleaner: 

Rinse with clean water and dry with a soft, lint-free cloth.

 

■

Glass cleaner to remove fingerprints.

 

■

For stainless steel models, rub in the direction of the 

grain to avoid scratching or damaging the surface.

 

■

For stainless steel models, use Stainless Steel Cleaner 

and Polish, Part Number 31462A (not included):  

See the “Assistance or Service” section to order.

To Clean the Filter:
1.  Remove the screw from the grease filter retainer.
2.  Turn the grease filter retainer to release the filter.

3.  Wash the metal filter as needed in a dishwasher 

or hot detergent solution.

To Replace the Filter:
1.  To reinstall the filter, place the back edge of the filter into the 

channel at the rear of the hood. Push the filter into place and 

turn the filter retainer to secure the filter to the range hood.

2.  Replace the screw in the grease filter retainer.

Turn off the range hood and allow the light bulb to cool.
1.  Disconnect power.
2.  Squeeze the plastic lens cover and remove it from the hood.

3.  Screw a 120V, 75W maximum, light bulb with 

E26 base into the socket.

4.  Replace the lens cover by squeezing the cover 

and inserting the tabs into the slots.

5.  Reconnect power.
If the new light does not operate, make sure the light bulb 

is inserted correctly before calling service.