KitchenAid Wall-Mount 600 CFM Exhaust Rating Ilustrações Dimensionais

KWCV107M
KWCV167M

120-volt, 60-Hz, AC-only, 15-amp.

electrical supply. Use copper wire only. A time-
delay fuse or circuit breaker and separate circuit is
recommended.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. 8285349

07-31-03

®

1 — 90° elbow 

=  5  ft. (1.5 m)

8 ft. (2.4 m) straight  =  8  ft. (2.4 m)
1 — wall cap 

=  0  ft. (0 m)

system length 

=13  ft. (3.9 m)

To calculate the length of the system
you need, add the equivalent feet for
each vent piece used in the system.

If it is used, each foot of flexible vent used
is equivalent to two feet (61 cm) of
straight metal vent when calculating the
vent system length.  (Example: A flexible
elbow equals two standard elbows.)

45° elbow

2.5 feet

(0.8 m)

90° elbow

5.0 feet

(1.5 m)

min. and max. ceiling or soffit height examples

distance from 

hood to cooking 

surface 

minimum

maximum

24" (61.0 cm)

7' 6-3/8" (2.30 m)

8' 6" (2.59 m)

26" (66.0 cm)

7' 8-3/8" (2.35 m)

8' 8" (2.64 m)

28" (71.1 cm)

7' 10-3/8" (2.40 m)

8' 10" (2.69 m)

30" (76.2 cm)

8' 3/8" (2.45 m)

9' 0" (2.74 m)

The hood chimneys are adjustable

and designed to meet varying ceiling or
soffit heights depending on the distance “X”
between the bottom of the hood and the
cooking surface. For higher ceilings, 40”
(10.2 cm) chimney extension Kit No. 8285600
or Kit No. 8285601 is available.  The chimney
extension replaces the upper chimney
shipped with the hood. The chimney
extension can be cut as needed. For shorter
ceilings or soffits, the upper chimney can be
cut.
Important:

Minimum distance “X”: 24” (61.0 cm)
Suggested maximum distance “X”: 

30” (76.2 cm)

As shown in charts below:
For vented installations, the chimneys can
be adjusted for ceilings between 7’ 6-3/8”
(2.30 m) and 9’ 0” (2.74 m).

For non-vented (recirculating) installations,
the chimneys can be adjusted for ceilings
between 8’ 3-3/8” (2.45 m) and 9’ 5-1/4”
(2.88 m).

min. and max. ceiling or soffit height examples

distance from 

hood to cooking 

surface 

minimum

maximum

24" (61.0 cm)

8' 3-3/8" (2.52 m)

8' 11-1/4" (2.72 m)

26" (66.0 cm)

8' 5-3/8" (2.57 m)

9' 1-1/4" (2.77 m)

28" (71.1 cm)

8' 7-3/8" (2.63 m)

9' 3-1/4" (2.83 m)

30" (76.2 cm)

8' 9-3/8" (2.68 m)

9' 5-1/4" (2.88 m)

As hood height (distance X)

increases, hood's venting effectiveness
decreases.