KitchenAid 5-Cycle Dishwasher with ProWash™ Cycle Guia Da Instalação

Using a flat-blade screwdriver, turn the plastic fasteners 

¹⁄₄ turn 

counterclockwise to unlock them. Remove panel. Do not remove 
tech sheet from access panel.

Using a 

¹⁄₄" hex-head socket, nut driver or Phillips screwdriver, 

remove 2 screws attaching access panel and lower panel to 
dishwasher. Do not remove tech sheet from access panel.

Using a 

¹⁄₄" hex-head socket, nut driver or Torx

®

 T20

®

 screwdriver, 

remove terminal box cover. Retain for later use.

Install a UL Listed/CSA Approved strain relief. Make sure screw 
heads are facing to the left when tightening conduit nut. Strain 
relief is provided with the power supply cord kit.

NOTE: If using Option B, proceed to “Determine Cabinet 
Opening,” to continue with the installation of your dishwasher.

Make Power Supply Cord Connection

Route cord so that it does not touch dishwasher motor to lower 
part of dishwasher tub. Pull cord through strain relief in terminal 
box. 
Select UL Listed/CSA Approved twist-on wire connectors rated to 
connect your power supply cord to 16-gauge dishwasher wiring.