KitchenAid 1.4 cu. ft. True Convection Microwave 4.1 cu. ft. True Convection Lower Oven Architect® Series Ilustrações Dimensionais

Página de 1
27" and 30" Electric Built-In Microwave/Oven Combination
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
KEHC309J
KEHC379J
KEHV309P
KEMC307K
KEMC308H
KEMC308K
KEMC377K
KEMC378H
KEMC378K
KEMS307G
KEMS308G
KEMS378G
Electrical: A three-wire or four-wire, single
phase, 240-volt, 60-Hz, AC-only electrical
supply is required. Models rated from 7.3 to
9.6 kW at 240 volts (5.5 to 7.2 kW at 208
volts) require a separate 40-ampere circuit,
fused on both sides of the line. Models rated at
7.2 kW and below at 240 volts (5.4 kW and
below at 208 volts) require a separate 30-
ampere circuit, fused on both sides of the line.
Use minimum 8 gauge copper wire only. A
time-delay fuse or circuit breaker is
recommended. A U.L.-listed conduit connector
must be provided at the junction box. 
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.
Ref. 8300653
07-19-05
41"
recessed
height
42-7/16"
overall
height
23" max.
recessed
depth
27” oven
41"
recessed
height
42-7/16"
overall
height
28-3/8" 
recessed
width
25-3/8" 
recessed
width
23" max.
recessed
depth
30” oven
26-3/4"
overall width
29-3/4"
overall width
Cabinet side view
23-1/4" min.
cutout depth
23" recessed
oven depth
recessed 
oven
cabinet
oven
front
30" min.
cabinet
width
1" top 
of cutout 
to bottom 
of upper
cabinet door
27" min.
cabinet
width
28-1/2"
cutout
width
25-1/2"
cutout
width
41-1/4"
cutout
height
19-1/4"
bottom
of cutout
to floor
1-1/2" min.
bottom of
cutout to
top of
cabinet
door
1" top of cutout
to bottom of
upper cabinet
door
1-1/2"
min.
bottom of
cutout to
top of
cabinet
door
19-1/4"
bottom of
cutout to
floor
30" oven
27" oven
41-1/4"
cutout
height
®