KitchenAid 24'' Wine Cellar, Left-Hand Door Swing, Architect® Series II Utilização E Cuidado

Using the Control

For your convenience, your wine cellar control is preset at the 
factory. When you first install your wine cellar, make sure that the 
control is still preset to the mid-setting as shown. 

The mid-setting indicated in the previous section should be 
correct for normal usage. The control is set correctly when the 
wine is as cold as you like. 
If you need to adjust the temperature, wait at least 24 hours 
between adjustments and then recheck the temperature. 
To make the wine cellar colder, adjust the control to the next 
higher setting. To make the wine cellar less cold, adjust the control 
to the next lower setting.
NOTE: Adjusting the temperature control raises or lowers the 
temperature in both the upper and lower zones (compartments).

The temperature separator displays the current temperatures 
(Fahrenheit or Celsius) for the upper and lower zones 
(compartments) of the wine cellar. To adjust the temperature 
settings, see “Adjusting the Control” earlier in this section.

For best storing and serving temperatures for your bottle of wine, 
use the wine producer's recommended temperature setting. See 
the wine’s label for details. It is recommended to store wine for 
short-term (few months) at 55°F (13°C).

Wine Racks

1. Pull the rack forward until it stops. 
2. Release the rack from the supports. 

■

Style 1 - Push in on the tabs to release the rack.

■

Style 2 - Lift up on the left-hand lever while pressing down 
on the right-hand lever to release the rack.

3. Pull the rack forward and lift it up and out of the rack supports
4. Replace the rack by inserting the rack into the supports and 

sliding it toward the rear of the wine cellar.

White Wine

Upper zone

Lighter Red Wine

Lower zone

Red Wine

Lower zone

Dimmer

Upper

Lower

F

A

B

C

D

A

A

A