KitchenAid 30-Inch Steam-Assist Combination Microwave Wall Oven, Architect® Series II Utilização E Cuidado

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle: 

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

BROILER PAN AND GRID (Accessory)

Do not clean in the Self-Cleaning cycle.

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with scouring or steel-wool 
pad.

■

Dishwasher

The oven lights are 12-volt, 5-watt maximum halogen bulbs. They 
will come on when the oven door is opened. On double oven 
models, both upper and lower lights will come on when either 
door is opened. The oven lights will not work during the Self-
Cleaning cycle. When the oven door is closed, touch OVEN 
LIGHT to turn light on or off.

Before replacing the bulb, make sure the oven is off and cool.

1. Disconnect power.

2. Remove glass light cover by grasping the front edge and 

pulling away from oven.

3. Remove bulb from socket.

4. Replace bulb, using tissue or wearing cotton gloves to handle 

bulb. Do not touch bulb with bare fingers. 

5. Replace bulb cover by snapping back into wall.

6. Reconnect power.

To avoid oven door glass breakage:

■

Do not close the oven door if the racks are not fully inserted 
into the oven cavity or when bakeware extends past the front 
edge of an oven rack.

■

Do not set objects on the glass surface of the oven door.

■

Do not hit glass surfaces with bakeware or other objects.

■

Do not wipe down glass surfaces until the oven has 
completely cooled.

For normal oven use, it is not suggested to remove the oven door. 
However, if removal is necessary, make sure the oven is off and 
cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.