Xerox Novell Distributed Print Services (NDPS) Support & Software Guia Do Utilizador

❖ 45

3. If an NDPS printer is removed, these objects are not 

automatically deleted.  When re-installing an NDPS 
printer, either manually remove these objects or chose 
a different name (from the default) in the Xerox 
Wizard dialog box.  To delete these objects, the Admin 
user can simply go to the Organizational Unit and 
delete the three contained objects associated with a 
particular Xerox printer. 

4. The configuration display in the NetWare Printer 

Manager (NWPM) and the NWAdmin software may 
not match.  They will not necessarily be the same, as 
the Xerox Print Control software of NWAdmin 
displays the network-wide configuration while 
NWPM software displays the configuration specified 
by the individual user.   Examples of areas that may 
differ are the Notification and the Printer Driver 
selections.

5. On installation of a printer agent the Xerox 

Installation Wizard may come back with an SNMP 
Communications error.  This could be due to a 
difference in frame types.  Check the properties under 
Microsofts’s Network Neighborhood and make sure 
the IPX frame type is set to the same frame type as the 
network it is running on.

6. Install wizard: If Printer Discovery for IP fails resulting 

in COM related error message, try launching the 
Install Wizard again. Re-running the Wizard will cause 
it to re-register the COM files on the Novell server. 
This will resolve the error and allow you to proceed.

Also, ensure that the path to NWADMIN is directly 
through the server \\server\sys\public, as opposed to 
through the tree \\tree\server_sys\public.

Check the World Wide Web for further information at the 
following sites: