Xerox WorkCentre 5865/5875/5890 Guia Do Administrador
Security
104
Xerox
®
WorkCentre
®
5800/5800i Series Multifunction Printer
System Administrator Guide
Creating a New Protocol Group
1.
Click Protocol Groups at the top of the IPsec page.
2.
Click Add New Protocol Group.
3.
Type a Name and a Description for the group.
4.
Under Service Name, select the protocols that you want to add to the group.
5.
To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
6.
To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
7.
Select TCP or UDP from the Protocol list.
8.
Type the port number, and specify if the printer is the server or client.
9.
Click Save to apply the new settings or Undo to retain the previous settings. Click Cancel to return
to the previous page.
Editing or Deleting a Protocol Group
To edit or delete a protocol group, select the protocol group from the list, and click
Edit or Delete.
Creating a New Action
1.
Click Actions at the top of the IPsec page.
2.
Click Add New Action.
3.
On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
4.
In the Description field, type a description for the action, if desired.
5.
Under Keying Method, select Manual Keying or Internet Key Exchange (IKE).
Note:
Select Manual Keying if client devices are not configured for or do not support IKE.
6.
If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click Next.