Xerox Phaser 4400 Folheto

■

Do not place the printer near a heat source.

■

Do not place the printer in direct sunlight.

■

Do not place the printer in line with the cold air flow from an air conditioning system.

■

Place the printer on a level, solid surface with adequate strength for the weight of the machine. The 
base printer weight without any packaging materials is approximately 25 kg (55 pounds).

■

The printer is heavy, and must be lifted by two people. The illustration below shows the proper 
technique for lifting the printer. 

Do not use the Multi-Purpose Tray or envelope feeder to lift the printer.

■

Follow the recommended procedure when moving the printer from one location to another. You 
can find this procedure in the Moving Guide section located in the Setup Guide of the Interactive 
Documentation CD-ROM. 

■

Do not place any liquids on the printer.

Be careful when working in areas inside the printer identified with a warning symbol. These 
areas may be very hot and could cause personal injury.

■

Wait 10-15 seconds between switching the printer off and on.

■

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

While printing, follow these safety guidelines:

■

Do not remove the paper source tray that you have selected in the driver or front panel

■

Do not open the covers while printing.

■

Do not move the printer while printing.

P4400-93