Xerox Phaser 780 Tabloid Guia Da Instalação
PhaserShare Networking Manual
67
TCP/IP Printer Configuration (All Platforms)
7
5.
Restart the DHCP server:
a.
In Control Panel:Services, scroll down to DHCP Server.
b.
Click Stop; then click Start.
c.
Click Close.
6.
Turn on the printer. The printer receives its IP address from the server.
Print a Configuration Page to obtain the IP address (see “The printer’s
Configuration Page” on page 6).
Print a Configuration Page to obtain the IP address (see “The printer’s
Configuration Page” on page 6).
7.
Using Add Printer Wizard (Windows NT 4.0) or Print Manager (Windows
NT 3.5x), verify that a Windows NT printer port refers to the printer’s IP
address or DNS name. See Chapter 10, “Windows NT” for more
information.
NT 3.5x), verify that a Windows NT printer port refers to the printer’s IP
address or DNS name. See Chapter 10, “Windows NT” for more
information.
8.
Configure the printer’s DHCP client software.
DHCP transactions
■
On power up or reset, the printer sends a DHCP discover packet, indicating
its Ethernet address and requesting an IP address.
its Ethernet address and requesting an IP address.
■
The DHCP server responds to the discover packet with a DHCP offer packet,
which contains an IP address from within the assigned scope and the
assigned lease.
which contains an IP address from within the assigned scope and the
assigned lease.
■
The printer examines the DHCP offer packet and decides whether to
accept the lease. The printer sends a request packet, accepting the IP address
and the lease.
accept the lease. The printer sends a request packet, accepting the IP address
and the lease.
■
The DHCP server sends an acknowledgment packet to the printer, completing
the transaction.
the transaction.
N
O
T
E
There can be multiple DHCP servers on the same network, each defining its
own scopes and leases. The printer selects the first lease offered.
own scopes and leases. The printer selects the first lease offered.