Xerox Phaser 740 Folheto

This table shows the selections available in the 

 menu.

Adjust light/dark
<----    ---->     Menu

Lightens or darkens all toner 
colors.

■

Press 

.

  Lighter/Darker:+0    *

<----    ---->    OK

Lightens or darkens all toner 
colors.  

The current Light/Dark setting 
reflects the 

average value of the 

four separate density settings.  
Each increase adjusts all four 
density values up or down the 
same amount.  The available 
adjustment range is limited so 
that no single color exceeds the 
±10 value limit.

■

To lighten colors, press 

 (the number 

decreases in 1-point 
steps); then press 

.

■

To darken colors, press 

 (the number 

increases in 1-point 
steps); then press 

.

Adjust each color
<----    ---->     Menu

Controls the color density for 
each color independently.

■

Press 

.

Color Reference Page
<----    ---->    Print

Prints a sample of the current 
density settings and a range of 
settings for each color.

■

Press 

.

Adjust <color>:     
<----    ---->    Menu

Enters the menu to calibrate a 
single color.

■

Press 

.

Adjust <color>:+0 *
<----    ---->    OK

Calibrates the indicated color.

■

To lighten this color 

toner, press 

 (the 

number decreases in 
1-point steps); then 
press 

.

■

To darken this color 

toner, press 

 (the 

number increases in 
1-point steps); then 
press 

.

Reset adjustments
<----    ---->    Menu

Resets the color calibration to 
the default settings.

■

Press 

; then press  

.

 

An asterisk (

) indicates the current setting.