Xerox DocuTech 6100 Production Publisher Folheto

Troubleshooting

8-12

System Guide

Enter the password and select Enter.

3. At the prompt (#), enter the following:  cd /opt/XRXnps/

XRXui61XX/data and select Enter.

4. Type:  ls -la and select enter.
5. Delete the files .npw and .sum by typing rm .npw .sum 

and selecting enter.

6. Open the System menu and select [Logon]. Select the 

desired user type and enter the password. Select OK.

7. An error message displays, A problem was detected in 

the password file. Select OK and retype the default 
password again and select OK.

8. A message displays in the main window which reads, 

Missing password file recreated.

9. Select on the missing password file recreated message. A 

pop-up window displays the service code C03-501. 
Another message is displayed which reads, The missing 
password file has been recreated. All current passwords 
are now valid. Contact the system administrator to install 
operator and system administrator passwords. 

10. Select [Reset].

If [Exit] is accidentally selected from the Xerox software, 
perform the following to start the software without rebooting 
the controller:
Open a terminal window and enter the following:

If a job takes longer to process than anticipated and a 
performance problem is suspected, take the following steps 
to check the system:

1. Check the job status in the Job Manager window.
2. If the job status is Hold, select [Release] to process the 

job.

3. If the job is RIPing, check the performance meter. If the 

CPU activity is high, the decomposer is working. If this is 
not true, restart the DocuSP software.