Xerox DocuColor 12 Printer with Matchprint Professional Server Guia Do Utilizador
Matchprint Professional Server for Xerox DocuColor 12 User Guide
©2002 Kodak Polychrome Graphics. All Rights Reserved.
18
Page Alignment...: Go to the Page Alignment section for more information on
this topic.
this topic.
CMYK Count, Gray Count, and Print Count: Displays the current print totals
for those categories. The Print Count can be reset to zero by clicking on the
for those categories. The Print Count can be reset to zero by clicking on the
Reset Print Count button.
4. Confirm the desired Media Settings for each tray and click OK.
The contents of each tray can vary from site to site, however standard tray
setup is as follows:
setup is as follows:
Tray 1: Media Type - Normal Bond, Media Size - Letter (8.5 x 11 inches)
Tray 2: Media Type - Normal Bond, Media Size - Letter SEF (11 x 8.5
inches)
inches)
Tray 3: Media Type - Normal Bond, Media Size - Legal (8.5 x 14 inches)
Tray 4: Media Type - Normal Bond, Media Size - Tabloid (11 x 17 inches)
Tray 6 (High Capacity Feeder) – Optional: Media Type - Normal Bond,
Media Size - Letter (8.5 x 11 inches)
Media Size - Letter (8.5 x 11 inches)
Notes:
Tray 5 is a manual feed tray located on the left side of the Xerox DocuColor
12. (Tray 5 is not configured here.)
Load KPG/Xerox Co-branded paper so the watermark is face down in the
tray.
The DocuColor 12 can be set to disable automatic tray switching, however
the Matchprint Professional Server overrides this setting if the job's
parameters are set to Automatically Select the input tray. Go to the
parameters are set to Automatically Select the input tray. Go to the
Setting Job Parameters, Printer tab for more information.
If calibration is required, go to Printer Calibration.