Craftsman 114092 Ficha De Dados Do Produto

#14 - 10 x 3/4 Cross-tip Screw 
(Qty: 4)

#14 - 10 x 5/8-in Hex Screws 
(Qty: 16)

3/8-in Wrench
7/16-in Wrench
Cross-tip Screwdriver

Items Needed:
#14 - 10 x 5/8-in Hex Screws (Qty: 16)
3/8-in Wrench

NOTE: Not all assembly instructions will relate to your model.

Items Needed:
#14 - 10 x 3/4 Cross-tip Screw (Qty: 4)
Cross-tip Screwdriver
Process:
•  Attach the side handle using (4) #14 - 10 x 3/4 Cross-tip 

screws.

•  Hand tighten. Do not overtighten.

•  Place the unit on its top. Use packaging material to 

protect the paint finish.

•  Position caster channels on the cabinet. Notched flanges  

should be toward the outside and pointed up.

•  Attach casters and caster channels using (4) #14 - 10 

x 5/8 Hex Screws for each caster. Mount both swivel 
casters on the same side of the cabinet as the side 
handle.

•  Wrench tighten all screws. Do not overtighten.
•  Return the unit to its upright position.

1/4 - 20 x 5/8 Screw (Qty: 16)

#14 - 10 x 3/4-in Screws 
(Qty: 16)

1/4-in Nut (Qty: 16)

Notches 
in front

Caster channels

Notches 
in back

2

CASTER INSTALLATION (40-INCH CABINET)
Items Needed:
1/4 - 20 x 5/8 Screw (Qty: 16)
1/4-in Nut (Qty: 16) 
7/16-in Wrench

• Remove the bottom drawer by following the drawer 
  removal instructions.
• Lay the cabinet down on its back. Use packaging 
  material to protect the paint finish.
• Mount both swivel casters on the same side of the cart 
  as the side handle.
• Attach each caster using (4) 1/4-20 x 5/8 screws and 
  (4) 1/4” nuts per caster.
• Wrench tighten all screws.
• Return the cart to its upright position.