Craftsman 17311 Manual Do Utilizador

5 - English

Battery Pack Voltage ............................................................................................................................................... 19.2 V DC
Charger Input......................................................................................................................................... 120 V, AC only, 60 Hz
Charge Time ...........................................................................................1 hour per port (Li-ion) / 45 minutes per port (NiCd)

See Figure 1, page i.
The safe use of this product requires an understanding 
of the information on the product and in this operator’s 
manual. Before use of this product, familiarize yourself 
with all operating features and safety rules.

Craftsman 19.2 V lithium-ion batteries are designed with 
features that protect the lithium-ion cells and maximize 
battery life.

The C3 status indicator button wakes the charger from 
sleep mode and indicates charger status.

Inserting the cord into the cord track keeps the power 
cord flat against the charger for hanging on the wall mount 
or sitting on a flat surface.

LEDs provide feedback to indicate whether the battery 
pack is charging, fully charged, or defective.

The battery charger can charge either lithium-ion or 
nickel-cadmium batteries.

The charger has a key hole hanging feature for convenient, 
space saving storage. Screws should be installed so that 
the center distance is 8-1/2 in.

The charger comes with a space-saving wall mount bracket 
for quick and easy storage. Screws should be installed so 
that the center distance is 10-1/4 in.

This product has been shipped completely assembled.


  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing 
list are included.

 Do not use this product if it is not 

completely assembled or if any parts appear to be 
missing or damaged. Use of a product that is not 
properly and completely assembled could result in 
serious personal injury.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have 

carefully inspected and satisfactorily operated the 
product.



  If any parts are damaged or missing, please call 

1-800-932-3188 for assistance.

Charger
Wall Mount Bracket
Operator’s Manual

If any parts are damaged or missing 

do not operate this product until the parts are 
replaced. Use of this product with damaged or  
missing parts could result in serious personal injury.

WARNING: 

Do not attempt to modify this product 

or create accessories not recommended for use with 
this product. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

See Figures 2 - 3, page i


  Find desired location indoors and away from any 

objects that could block vents on charger. Locate a 
wall stud to securely mount bracket.



  You will need two #8 - 2 1/2 in. screws (not included)



  Use a level to be sure that bracket is in a vertical 

position. Use a pencil to mark screw hole placement. 
Screws should be installed so that the center distance 
is 10-1/4 in.



  Install screws to securely attach bracket.



  Place bottom end of charger into bracket then snap top 

of charger securely into bracket. 



  Charger should fit snugly and securely in bracket.