Craftsman 3100iSC Manual Do Utilizador
![Craftsman](https://files.manualsbrain.com/attachments/64d6cde975b4a3b8237659498f8efc460daae72a/common/fit/150/50/86e49e5c9c65cca0b47572681506b669ff7da60b30985782de01b2359a72/brand_logo.png)
Using the Diagnostic Tool
VIEWING ABS DTCs
47177 51
The diagnostic tool will display a code
only if codes are present in the vehi-
cle’s computer memory. If no codes
are present, a “No Enhanced DTC’s
are presently stored in the vehicle’s
computer” is displayed. Press the M
button to return to the Main Menu.
only if codes are present in the vehi-
cle’s computer memory. If no codes
are present, a “No Enhanced DTC’s
are presently stored in the vehicle’s
computer” is displayed. Press the M
button to return to the Main Menu.
3.
If more than one code was retrieved press the DTC button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the diagnostic tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
the diagnostic tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
button again.
4.
When the last retrieved DTC has been displayed and the DTC
button is pressed, the diagnostic tool returns to the “Priority” code.
To view additional enhanced DTCs, repeat steps 1 through 4,
above.
above.
To exit the enhanced mode, press the M button to return to the
Main Menu. Use the UP
Main Menu. Use the UP
and DOWN
buttons, as
necessary, to highlight Global OBD, then press the ENTER
button to return to the Global OBD2 mode.
VIEWING ABS DTCs
Refer to Vehicle Applications - ABS on page 84 for vehicle
makes covered. For a complete list of vehicle’s covered,
please visit www.innova.com.
makes covered. For a complete list of vehicle’s covered,
please visit www.innova.com.
Reading ABS DTCs
1.
From the OBD2 DTC screen or OEM
enhanced DTC screen, press the ABS
button.
button.
2.
A "One moment please" message
displays while the diagnostic tool
retrieves the selected DTCs.
retrieves the selected DTCs.
If the vehicle does not support ABS
communication, an advisory message
shows on the diagnostic tool’s display.
Press the M button to return to the
Main Menu.
communication, an advisory message
shows on the diagnostic tool’s display.
Press the M button to return to the
Main Menu.
If the diagnostic tool fails to link to the
vehicle’s computer, a “Linking Failed”
message shows on the diagnostic
tool’s display.
vehicle’s computer, a “Linking Failed”
message shows on the diagnostic
tool’s display.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then turn back ON to reset
the computer.