Craftsman SM2511RC Manual Do Utilizador
48
49
TROUBLESHOOTING GUIDE
WARNING
!
To avoid injury from accidental starting, always turn switch OFF and unplug
the tool before moving, replacing the blade or making adjustments.
TROUBLESHOOTING GUIDE - MOTOR
PROBLEM
PROBLEM CAUSE
SUGGESTED CORRECTIVE
ACTION
Brake does not
stop blade within
6 seconds.
1. Motor brushes not sealed
or lightly sticking.
2. Motor brake overheated
from use of defective or
wrong size blade or rapid
ON/OFF cycling.
3. Arbor bolt loose.
4. Brushes cracked,
damaged, etc.
5. Other.
1. Inspect/clean/
replace brushes. See
MAINTENANCE section.
2. Use a recommended
blade. Let cool down. See
REMOVING OR INSTALLING
THE BLADE section.
3. Retighten. See REMOVING
OR INSTALLING THE
BLADE section.
4. Replace brushes.
5. Contact Sears Service
Center.
Motor does not
start
1. Limit switch failure
2. Brush worn.
3. Fuse blown or circuit
breaker tripped on home
panel.
4. Other.
1. Replace limit switch.
2. Replace brushes. See
MAINTENANCE section.
3. Verify there is electrical power
at the outlet.
4. Contact Sears Service Center.
Brush spark when
switch released.
1. Brush worn.
2. Other.
1. Replace Brushes. See
MAINTENANCE section.
2. Contact Sears Service Center.