Craftsman SM2511RC Manual Do Utilizador
4
5
POWER TOOL SAFETY
GENERAL SAFETY INSTRUCTIONS
BEFORE USING THIS POWER TOOL
Safety is a combination of common
Safety is a combination of common
sense, staying alert and knowing how
to use your power tool.
To avoid mistakes that could cause
serious injury, do not plug the tool in
until you have read and understood
the following.
1.
READ and become familiar
with the entire Operator’s
Manual.
LEARN the tool’s
application, limitations and possible
hazards.
2.
KEEP GUARDS IN PLACE and in
working order.
3.
REMOVE ADJUSTING KEYS
AND WRENCHES. Form the habit
of checking to see that keys and
adjusting wrenches are removed
from the tool before turning ON.
4.
KEEP WORK AREA CLEAN.
Cluttered areas and benches invite
accidents.
5.
DO NOT USE IN DANGEROUS
ENVIRONMENTS. Do not use
power tools in damp locations, or
expose them to rain or snow. Keep
work area well lit.
6.
KEEP CHILDREN AWAY. All visitors
and bystanders should be kept a
safe distance from work area.
7.
MAKE WORKSHOP CHILD
PROOF with padlocks, master
switches or by removing starter
keys.
8.
DO NOT FORCE THE TOOL. It will
do the job better and safer at the
rate for which it was designed.
9.
USE THE RIGHT TOOL. Do not
force the tool or an attachment
to do a job for which it was not
designed.
10.
USE PROPER EXTENSION
CORDS. Make sure your extension
cord is in good condition. When
using an extension cord, be sure to
use the one heavy enough to carry
the current that the product will
draw. An undersized cord will result
in a drop in line voltage and in
loss of power which will cause the
tool overheat. The table on page
11 shows the proper wire gauge
size usage to each extension cord
length and ampere rating. If in
doubt, use the next heavier gauge.
The smaller the gauge number, the
heavier the cord.
11.
WEAR PROPER APPAREL. Do
not wear loose clothing, gloves,
neckties, rings, bracelets or other
jewelry which may get caught in
moving parts. Nonslip footwear is
recommended. Wear protective
hair covering to contain long hair.
WARNING
!