Farberware Iron Manual De Instruções
10
TO CLEAN SOLEPLATE
The Iron should be fully cooled before Soleplate cleaning begins.
Make sure the Iron is unplugged before cleaning. Empty the
Water Tank of any remaining water. Apply a small amount of mild
cleaner to a damp cloth. Gently rub Soleplate, then wipe with a
moist cloth. NEVER USE scouring pads or abrasive cleaners on
the Soleplate, as this may scratch the surface.
Make sure the Iron is unplugged before cleaning. Empty the
Water Tank of any remaining water. Apply a small amount of mild
cleaner to a damp cloth. Gently rub Soleplate, then wipe with a
moist cloth. NEVER USE scouring pads or abrasive cleaners on
the Soleplate, as this may scratch the surface.
Wipe all other surfaces with a slightly damp cloth. Never allow
water or any other liquid to get into the unit, except when filling
the Water Tank. NEVER put any chemical cleaning agents or
solvents in the Water Tank.
water or any other liquid to get into the unit, except when filling
the Water Tank. NEVER put any chemical cleaning agents or
solvents in the Water Tank.
BEFORE USING AGAIN, preheat and move Iron over an old
cloth several times to remove any residue from the Soleplate.
cloth several times to remove any residue from the Soleplate.
TO STORE
Unplug appliance and allow to cool. STORE IN UPRIGHT
POSITION ON HEEL REST. Never store Iron lying on the
Soleplate. Never store it while it is hot or still plugged in. Never
wrap cord tightly around the appliance. Do not put any stress on
the cord where it enters the unit, as it could cause the cord to fray
and break.
POSITION ON HEEL REST. Never store Iron lying on the
Soleplate. Never store it while it is hot or still plugged in. Never
wrap cord tightly around the appliance. Do not put any stress on
the cord where it enters the unit, as it could cause the cord to fray
and break.