Honeywell 7-Day Programmable Thermostat (RTH7600D) Manual Do Proprietário

Program schedule override (permanent)

Press

to adjust temperature,

then press HOLD. This will turn off the

program schedule.
Whatever temperature you set will

be maintained 24 hours a day, until

you manually change it, or press

USE SCHEDULE to cancel “Hold” and

resume the program schedule.

CAUTION:

To avoid possible compressor damage, do not use Auto

Changeover if the outside temperature drops below 50°F (10°C).

Auto changeover

Use this feature in climates where both air conditioning and heating are

used on the same day. When the system mode is in Auto, the thermostat

automatically selects heating or cooling depending on the indoor temperature.
While in the Auto mode, if a schedule override takes place (temporarily or

permanently) the thermostat will automatically adjust the cooling and heating

settings to maintain a 3-degree separation between the cool and heat settings.
For example, if the heat temperature

is raised to where it gets within

3-degrees of the cool setting, the

display will show an up arrow next

to “Cool” to show the thermostat is

raising the cool setting up to maintain

a 3-degree separation.
The display will also show both “Auto”

and either “Heat” or “Cool” for which

temperature setting you are currently

adjusting. Press the system button to select between the heat and cool to view/

adjust either mode.

Tue

System

Hold

Cancel

M27534

System Auto

Heat

Fan Auto

Temporary

Set To

Heat

Cool

1:09

Mon

Hold

Cancel

M27533

Temporary

Set To

System

Heat

Fan Auto

6:08

Permanent Hold