Zanussi ZRA21600WA Manual Do Utilizador

If the ambient temperature is high or

the appliance is fully loaded, and the

appliance is set to the lowest

temperature, it may run continuously

causing frost to form on the rear

wall. In this case the dial must be set

to a higher temperature to allow

automatic defrosting and therefore

reduced energy consumption.

Before using the appliance for the first time, the

interior and all internal accessories should be

washed with lukewarm water and some neutral

soap to remove the typical smell of a brand-new

product, then dried thoroughly.

Do not use detergents or abrasive

powders, as these will damage the

finish.

Refer to Safety chapters.

The walls of the refrigerator are equipped with a

series of runners so that the shelves can be

positioned as desired.

To permit storage of food packages of various

sizes, the door shelves can be placed at

different heights.
1. Gradually pull the shelf in the direction of

the arrows until it comes free.

2. Reposition as required.

The following sounds are normal during

operation:
• A faint gurgling and bubbling sound from

coils sound when refrigerant is pumped.

• A whirring and pulsating sound from the

compressor when refrigerant is pumped.

• A sudden cracking noise from inside

appliance caused by thermic dilatation (a

natural and not dangerous physical

phenomenon).

• A faint click noise from the temperature

regulator when the compressor switches on

or off.

• Do not open the door frequently or leave it

open longer than absolutely necessary.

• If the ambient temperature is high and the

Temperature Regulator is set to low

temperature and the appliance is fully

loaded, the compressor may run