Zanussi ZOP37962XE Manual Do Utilizador

If there are other appliances installed

in the same cabinet, do not use

them when the Pyrolysis function

operates. It can cause damage to

the appliance.

1. Remove the worst dirt manually.

2. Clean the inner side of the door with hot

water, so that the residues do not burn from

the hot air.

3. Set the Pyrolysis function. Refer to "Oven

functions".

4. When 

 flashes, press   or   to set

the necessary procedure:

P1

If the oven is not

very dirty. Time

of the proce-

dure: 1 h.

P2

If you cannot

easily remove

the dirt. Time of

the procedure: 1

h 30 min.

Press   or turn the knob for the temperature to

start the procedure.

You can use the End function to delay the start

of the cleaning procedure.

During the Pyrolysis the oven lamp is off.

5. When the oven is at its set temperature, the

door locks. The display shows the symbol

 and the bars of the heat indicator until

the door unlocks.

To stop Pyrolysis before it is completed,

turn the knob for the oven functions to the

off position.

6. When Pyrolysis is completed, the display

shows the time of day. The oven door stays

locked.

7. When the appliance is cool again, an

acoustic signal sounds and the door

unlocks.

To remind you that the Pyrolysis is necessary,

PYR flashes in the display for 10 seconds after

each activation and deactivation of the

appliance.

• after the end of the Pyrolysis

function.

• if you press   and   at the

same time while PYR flashes in

the display.

The oven door has three glass panels.You can

remove the oven door and the internal glass

panels to clean them.

The oven door can close if you try to

remove the glass panels before you

remove the oven door.

Do not use the appliance without the

glass panels.

Open the door fully

and hold the two

door hinges.

Lift and turn the

levers on the two

hinges.

Close the oven door

halfway to the first

opening position.

Then pull forward and

remove the door from

its seat.

Put the door on a soft

cloth on a stable

surface.