Zanussi ZOP37962XE Manual Do Utilizador

Refer to Safety chapters.

• Clean the front of the appliance with a soft

cloth with warm water and a cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each use.

Fat accumulation or other food remains may

result in a fire. The risk is higher for the grill

pan.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use and let

them dry. Use a soft cloth with warm water

and a cleaning agent.

• If you have nonstick accessories, do not

clean them using aggressive agents, sharp-

edged objects or a dishwasher. It can cause

damage to the nonstick coating.

Clean the oven door with a wet

sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean the

oven control panel with the same

precautions.

To clean the oven, remove the shelf supports.

Pull the front of the

shelf support away

from the side wall.

Pull the rear end of

the shelf support

away from the side

wall and remove it.

Install the shelf supports in the opposite

sequence.

Remove all accessories and

removable shelf supports.

Do not start the Pyrolysis if you did

not fully close the oven door. In

some models, the display shows

"C3" when this error occurs.

The appliance becomes very hot.

There is a risk of burns.

If there are other appliances installed

in the same cabinet, do not use

them at the same time as the

Pyrolysis function. It can cause

damage to the appliance.

1. Remove the worst dirt manually.

2. Clean the inner side of the door with hot

water, so that the residues do not burn from

the hot air.

3. Set the Pyrolysis function. Refer to "Oven

functions".

4. When 

 flashes, press   or   to set

the necessary procedure:

P1

If the oven is not

very dirty. Time

of the proce-

dure: 1 h.

P2

If you cannot

easily remove

the dirt. Time of

the procedure: 1

h 30 min.

After 2 seconds the procedure starts.

You can use the End function to delay the start

of the cleaning procedure.

During the Pyrolysis the oven lamp is off.

5. When the oven is at its set temperature, the

door locks. The display shows the symbol