Zanussi ZCG43TC0WA Manual Do Utilizador

A. Burner cap

B. Burner crown

C. Ignition candle

D. Thermocouple

E. Hob

F. Slots

G. Burner body

H. Location peg

I. Hole for the ignition candle

1. Put carefully the burner crown on the burner

body. Let the crown fall freely onto the

body. Do not use force.

Make sure that the hole in the crown is

above the ignition candle.

Make sure that the location pegs are in the

slots in the burner body.

Make sure that you can move the crown a

small distance from side to side.

2. Put the burner cap centrally on top of the

crown.

Make sure that the cap is correctly installed,

with the enamel side up and you can move

the cap from side to side and front to back.

3. Light the burner.

If the burner does not ignite, adjust the crown

and cap again.

To put the flame out, turn the knob to the off
position  .

Always turn the flame down or

switch it off before you remove the

pans from the burner.

Refer to Safety chapters.

Do not put unstable or damaged

pots on the burner to prevent from

spill and injury.

Make sure that pot handles are not

above the front edge of the cooktop.

Make sure that the pots are placed

centrally on the burner in order to

get maximum stability and to get

lower gas consumption.

Use cookware with diameters

applicable to the size of burners.

Rapid

180 - 260

Semi-rapid

120 - 220

Auxiliary

80 - 160