Zanussi ZWF91283W Manual Do Utilizador

You can cancel or change the set of

the Finish In option before you touch
the button

. After touching the

button

you can only cancel the

Finish In option.

To cancel the the Finish In option:

a. Touch the button

to set the

appliance to pause. The indicator of
button

flashes.

b. Touch the button until the indicator

above this button goes off.
Touch the button

again to start the

programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they

operate.

1. Touch

The indicator of this button flashes.

2. Change the options. If you change any

option the Finish In option (if set) will be

disabled.

3. Touch

again.

The programme continues.

Cancelling a programme

1. Press the button for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

The appliance does not drain the

water. The water left in a drum can

be used for the next washing cycle.

Opening the door

While a programme (or the ) operates, the
appliance door is locked. The indicator

on.

CAUTION!

If the temperature and level of the

water in the drum are too high, you

cannot open the door.

To open the door during the first minutes
of the cycle (or when the operates) :

1. Touch the button

to pause the

appliance.

2. Wait until the indicator

goes off.

3. You can open the door.
4. Close the door and touch the button

again. The programme (or the )

continues.

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is

activated).

• In the display comes on.
• The indicator of the button

goes off.

• The door lock indicator

goes off.

• You can open the door.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Press the button for some seconds to

deactivate the appliance.

• Close the water tap.

• Keep the door and the detergent drawer

ajar, to prevent the mildew and odours.

The washing programme is completed,

but there is water in the drum:

• The drum turns regularly to prevent the

creases in the laundry.

• The indicator

flashes to remind you to

drain the water.

• The door lock indicator

is on. The

indicator of button

flashes. The door

stays locked.

• You must drain the water to open the door.
Draining the water:
1. To drain the water.

• Touch the button

. The appliance

drains the water and spins with the

maximum spin speed for selected

washing programme.

• Alternatively, touch the button to

change the spin speed and then touch
the button

. The appliance drains the

www.zanussi.com