Philips BT 7085/15 BEARDTRIMMER Series 7000 Manual Do Utilizador

Página de 172
 - Children should be supervised to ensure that they do not play with  
the appliance.
 - Always check the appliance before you use it. Do not use the appliance 
if it is damaged, as this may cause injury.
 - Do not use the appliance in the bath or in the shower.
Caution
 - Only use the adapter supplied.
 - Use, charge and store the appliance at a temperature between  
5°C and 35°C.
 - Do not charge the appliance in the storage pouch supplied  
(BT7085 only).
 - Do not use the appliance if one of the trimming combs or the cutting 
unit is damaged or broken, as this may cause injury.
 - If the adapter, the cutting unit or one of the trimming combs is 
damaged, always have it replaced with one of the original type in order 
to avoid a hazard.
 - This appliance is only intended for trimming the human beard.  
Do not use it for any other purpose.
General
 - The adapter is equipped with an automatic voltage selector and is 
suitable for mains voltages ranging from 100 to 240 volts.
 - The adapter transforms 220-240 volts to a safe low voltage of less  
than 24 volts.
 - Noise level: Lc = 65 dB(A).
Electromagnetic fields (EMF)
 - This Philips appliance complies with all applicable standards and 
regulations regarding exposure to electromagnetic fields.
Preparing for use
Charging (BT7085/QT4070)
Charge the appliance fully before you use it for the first time and after a 
long period of disuse.
Standard charging takes approximately 60 minutes.
 1 
 Switch off the appliance before you charge it.
 2 
 Insert the appliance plug into the appliance and put the adapter in 
the wall socket.
 
, When you start charging the empty appliance, the bottom segment 
of the charge level indicator flashes orange. When the battery 
contains enough power for one trimming session of approx.  
7 minutes, the bottom segment starts flashing blue.
 
, First the bottom segment of the charge level indicator flashes blue, 
then the second segment and so on, until the appliance is fully 
charged. 
 
, When the appliance is fully charged, all segments of the charge level 
indicator light up blue continuously. 
 
, If the fully charged appliance is still connected to the mains after  
1 hour, the segments of the charge level indicator go out.
ENGLISH
5