Timberk TCH A3 2000 Manual Do Utilizador

www.timberk.com • electric ceiling heater

4

Minimum distances from the heater to other surfaces according to Fig. 1 

are given in Table 2.
Table 2

WARNING! 

At long standing in the heated area, the distance from 

the heater radiating boards to a person or an animal at 

indoor air temperature below +11 °C should be at least 

1.8 m.

IMPORTANT! 

The manufacturer reserves the right to change the set-list of the 

device (including liquid and powder components) for different 

supplies without prior notice. The changes either in no way influence 

the basic technical parameters of the device or may improve them, 

and also not violate the legislation or quality standards of the 

countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight 

and dimensions of the device, but not more than by +\- 5-20% 

(depending on the product category)

NOTE:

Heated area in the table is indicated for reference, since it depends 

both on the heater power, and on room type, ceiling height, wall/

ceiling materials, number and area of glazing, presence of doors, 

etc.

Fig.1

Technical specifications
Technical specifications of the TCH A3 infrared heater.

For more detailed description of technical parameters and specifications please refer to our 

website www.timberk.com or ask from the official dealers of TIMBERK.

Nominal power consumption

W

1000

1500

2000

Rated current

A

4,5

6,8

9,1

Rated voltage

V/Hz

~220/50

~220/50

~220/50

Water protection class

 

IP20

IP20

IP20

Electric protection class

 

Class I

Class I

Class I

Recommended installation 

height

m

2,5

2,7

3,5

Weight

kg

2,0

2,9

3,6

Dimensions

mm

50x935x110

50x1360x110

50x1785x110

A

78

78

78

B

150

150

150

C

600

600

600

D

2500

2700

3500

E*

700

700

700

* At long standing in the heated area