Cisco Cisco Clean Access 3.5
15-4
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 15 Device Management: Roaming
Before Starting
Figure 15-3
Advanced Roaming
Before Starting
Before setting up roaming, you need to add the Clean Access Servers for which you want to support
roaming to the Clean Access Manager’s administrative domain. See
roaming to the Clean Access Manager’s administrative domain. See
For advanced roaming, the managed subnets also need to be added to the Clean Access Server’s
configuration. To view or modify managed subnet settings, go to the following CAS configuration page:
Device Management > CCA Servers >Manage [CAS_IP] > Advanced > Managed Subnet. For more
information, see the Cisco Clean Access Server Installation and Administration Guide.
configuration. To view or modify managed subnet settings, go to the following CAS configuration page:
Device Management > CCA Servers >Manage [CAS_IP] > Advanced > Managed Subnet. For more
information, see the Cisco Clean Access Server Installation and Administration Guide.
Once you have configured managed Clean Access Servers and, optionally, managed subnets, use the
procedures described in the following sections to set up roaming.
procedures described in the following sections to set up roaming.
AP
CAS-1
CAS-2
AP
CAM
subnet:
subnet:
10.1.2.23
subnet 10.1.3.0
10.1.1.23
10.1.2.0 /24
10.1.1.0 /24
10.1.1.23
subnet 10.1.2.0 Forwarding = Disabled
subnet 10.1.1.0 Forwarding = Enabled
subnet 10.1.2.0 /24
subnet 10.1.1.0 /24
managed subnets:
roaming
10.1.2.23
enabled!
roaming
blocked!
roaming configuration: