Cisco Cisco 1-Port DOCSIS-based Cable High-speed WAN Interface Card (HWIC) Ficha De Dados
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 1
Cisco Cable High-Speed WAN Interface Cards
The Cisco
®
integrated Cable high-speed WAN interface cards (HWICs) provide lower total cost of
ownership, advanced quality-of-service (QoS) enforcement, and advanced monitoring and load-balancing
capabilities for customers by optionally integrating a DOCSIS 2.0-based cable modem within a Cisco
Integrated Services Router (ISR) or Cisco IAD2430 Series Integrated Access Device.
Additionally, the new Cisco Cable HWICs greatly expand the portfolio of managed business-class cable
services cable operators can offer to their small and medium sized business (SMB) and enterprise
customers. The Cisco ISRs and Cisco IAD2430 Series can be coupled with the cable HWIC to provide a
range of services, including security, IP Communications, switching, wireless LAN management and
connectivity, WAN optimization, and much more.
Overview
The new Cable HWICs (HWIC-CABLE-D-2 and HWIC-CABLE-E/J-2) are designed to comply with DOCSIS 2.0,
Euro-DOCSIS 2.0, and J-DOCSIS 2.0 specifications and provide single-port cable modem connectivity for the Cisco
modular integrated services routers and the Cisco IAD2430 series routers to the cable operator WAN. These cable
HWICs (Figure 1), combined with the Cisco 2800 and 3800 Series Integrated Services Routers; Cisco 1841 and
1941 Integrated Services Routers and Cisco IAD2430 Series provide high-speed digital data transmission between
customer premises equipment (CPE) and a central office. This enables cable service providers and resellers to offer
additional services by supporting features for business-class security, voice integration, differentiated classes of
service (CoS), and managed network access with Cisco IOS® Software. These value-added features, along with the
manageability and reliability of Cisco IOS Software technology, provide the mission-critical networking that
businesses require.
Figure 1. Single-Port DOCSIS 2.0 and Euro/J-DOCSIS 2.0-Based Cable HWICs (HWIC-CABLE-D-2 and HWIC-CABLE-E/J-2)
Both the 1-port DOCSIS-based cable HWIC and the one-port Euro/J-DOCSIS-based cable HWIC cards provide a
single F-connector for broadband connectivity. The cable HWICs are supported starting with Cisco IOS Software
Release 12.4(11)T. Cable operators can use the Cisco ISRs and Cisco IAD2430 Series when combined with the
cable HWICs to provide a vast array of business services, including voice, video, data, security, wireless, switching,
and content caching over the DOCSIS network.
The cable HWICs embedded in the Cisco IOS Software routers provide an integrated solution for a cost-effective
alternative to leased lines, ISDN, or xDSL services for critical primary WAN links or backup solutions. Cable service
providers and enterprise customers can also benefit from ease of deployment and management by deploying an