Cisco Cisco WVC200 Wireless-G PTZ Internet Video Camera - Audio

Página de 3
Sercomm Corporation 
 
 
WVC200 USA Release Note  
2008/07/22 V1.2.1  
 
1)  Fix bug: When video quality were set to high or very high and with 
complex backgrounds, video clips would be  
corrupted.  
  
2008/07/01 V1.2.0  
1)  Fix bug: Video clips are corrupted.  
2) Update: Release FW with  extension number. The information can be 
found when requesting  
http://<ip>/adm/sysinfo.cgi using browser. The format will be V1.2.0R10 
E01.  
3)  Fix bug: When the FTP server shutdown, the camera did not keep trying 
to setup connections with the server.  
4)  Fix bug: clicking the apply button on basic.htm page reverted “Current 
Date/Time” to previous settings.  
5)  Fix bug: clicking the calibration button twice caused PT to move longer 
than expected.  
6)  Fix bug: Video clips of emails lost audio track.  
7)  Fix bug: authentication check was disabled after saving changes in user 
list.  
8)  Fix bug: Video clip of Email lost some frames after event triggered  
9) Fix bug: The button of Pan/Tilt on Monitor utility will gray out when the 
setting of Options is set on “Disable  
Pan/Tilt while Motion Detection”  
10) Fix bug: snapshot.cgi always display 160X128 image.  
(http://xxx/img/snapshot.cgi?size=<resolution>  
 where <resolution>=1     160X128  
                  =2     320X240  
                  =3     640X480  
11) Allow user to change SMTP port.  
12) “FTP server name” allow characters from ‘A’-‘Z’, ‘a’- ‘z’, ‘0’-‘9’,’ –‘ ,’ 
_ ‘ and ‘.’    
13) Fix bug: FTP Failover is incorrect when “Photo” is 4 “Shot(s)” and 
“Upload interval” is “Every 30 seconds”