Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter Guia Do Desenho

The Cisco REAP AP, the 1030, is capable of supporting up to 16 WLANs. Although all WLANs can be 
locally switched, the 1030 (when configured for REAP operation) has the following limitations 
compared to an LWAPP AP that is deployed in a regular centralized topology:

It does not support 802.1Q trunking. All WLANs terminate on a single local VLAN/subnet.

In the event of a WAN link outage, all WLANs except WLAN 1 become disabled and are no longer 
broadcasted (if enabled).

Cisco addressed these limitations with the introduction of a new version of REAP called Hybrid Remote 
Edge AP (H-REAP), which offers the ability to map WLANs to VLANs via 802.1Q trunking. 
Additionally, an H-REAP AP can support local switched and centrally switched WLANs concurrently. 
The remainder of this chapter focuses on application, features, limitations, and configuration of the 
H-REAP APs and, when applicable, highlights the differences between H-REAP and the older 1030 
REAP platform.

H-REAP APs are supported by the following WLAN WLC platforms with version 4.0 and later software 
images:

Cisco 2100 Series 

Cisco 4400 Series

Cisco 6500 Series WiSM

Cisco WLAN WLC modules for Integrated Service routers (ISR) 

Cisco Catalyst C3750G-24WS

Centralized

WLAN Controller

Branch

Servers

REAP

LWAPP Control

Local Switched Data

Corporate

Servers

WCS

190695