Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter Guia Do Desenho
10-23
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Access Configuration
Figure 10-18
WLAN Configuration Page
Note
The interface used by the foreign WLC for the guest WLAN is the 'Management' interface. The
management interface must be selected in order for the foreign WLC to establish an EoIP tunnel to the
anchor WLC. Note that in
management interface must be selected in order for the foreign WLC to establish an EoIP tunnel to the
anchor WLC. Note that in
above, the anchor WLC maps the WLAN to a local dynamic
interface that is switched to the firewall.
Defining Guest WLAN Parameters and Policies
Under the General Configuration tab, perform the following steps.
Step 1
Enable the WLAN by clicking the box next to WLAN Status.
Step 2
Optionally, set the radio policy if you wish to restrict which bands support the guest access.
a.
Broadcast SSID is enabled by default; leave enabled.
b.
By default, the WLAN is assigned to the “management” interface of the WLC. Do not change this.
Note
The interface name must be set to the management interface. This causes the foreign controller
to initiate an EoIP tunnel via its management IP.
to initiate an EoIP tunnel via its management IP.
Step 3
Click the Security tab. (See
.)