Cisco Cisco PVC2300 Business Internet Video Camera - Audio PoE Manual De Manutenção

Home

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

40

 

Select the preset area to patrol. See 

 for more information about 

setting these positions. This icon becomes visible after 
enabling RS-485.

Move the camera one time through the preset 
positions. This icon becomes visible after enabling RS-
485.

Allows you to incrementally adjust the camera in four (4) 
directions and back to home. There may be a short 
delay after a direction is clicked.

The Move Control icon becomes visible after enabling 
RS-485. You also need to connect the camera to an 
external Pelco D protocol device for the Move Control 
to work.

Select the desired resolution from the drop-down list. 
The options are AUTO, 640 x 480, 320 x 240, 160 x 120. 
The default is AUTO and lets the camera determine the 
resolution.

Click zoom and then drag your mouse to select the 
section you want to magnify. Click the icon again to 
increase the zoom to x4 from x2.

Click to take a single JPEG picture snapshot of the 
video image and save it to a desired location on your 
computer.

When the audio is enabled, an icon is displayed on the 
Home window and audio is picked up through the 
camera. You can then use the icons to turn the speaker 
on and off. To enable the sound, see