Cisco Cisco Web Security Appliance S360 Guia De Resolução De Problemas
Transfer the License from the Current Cisco
Content Security Appliance to an RMA Appliance
Content Security Appliance to an RMA Appliance
Document ID: 118000
Contributed by Andy Lau and Robert Sherwin, Cisco TAC Engineers.
Jul 22, 2014
Jul 22, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Transfer the License
Prerequisites
Requirements
Components Used
Transfer the License
Introduction
This document describes how to use the License Administration Portal tool, validate the licensed features for
your appliance, and transfer them from your failed appliance to your Return Material Authorization
(RMA)−provided appliance.
your appliance, and transfer them from your failed appliance to your Return Material Authorization
(RMA)−provided appliance.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco Email Security Appliance (ESA)
•
Cisco Security Managment Appliance (SMA)
•
Cisco Web Security Appliance (WSA)
•
Components Used
The information in this document is based on all versions of the Cisco ESA, the Cisco SMA, and the Cisco
WSA.
WSA.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Transfer the License
Complete these steps in order to transfer the licence (feature keys) form the current Cisco content security
appliance to an RMA appliance.
appliance to an RMA appliance.
Visit the License Administration Portal.
1.
Under the Manage section, click Devices and select RMA from the Actions drop−down menu.
2.