Cisco Cisco UCS B440 M1 High-Performance Blade Server Manual Técnico

Contributed by Shankar Prasath R, Cisco TAC Engineer.
Aug 25, 2014

Introduction
Prerequisites
     Requirements
     Components used
Background information
     VM−FEX
     SR−IOV
Configure
Verify
Troubleshoot
Related Information

This beginner−level document describes the minimum settings required in order to configure the Cisco
Virtual Machine Fabric Extender (VM−FEX) with Hyper−V on Windows Server 2012 with  Unified
Computing System (UCS) Release 2.1. It does not explain all the options in detail. Refer to the Cisco UCS
Manager VM−FEX for Hyper−V GUI Configuration Guide, Release 2.1 for more information.

In order to configure VM−FEX with Hyper−V on UCS Release 2.2, refer to Cisco UCS Manager VM−FEX
for Hyper−V GUI Configuration Guide, Release 2.2.

Cisco recommends that you have a working knowledge of these topics:

Cisco UCS and UCS Manager (UCSM)

• 

Windows Server 2012 and Hyper−V Version 3.0

• 

These are the minimum prerequisites needed in order to configure VM−FEX with Hyper−V:

UCS Version 2.1(1a) or later

• 

Server that Contains a Cisco VIC Adapter

• 

Windows Server 2012 or later

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.