Cisco Cisco UCS M4308 Modular Chassis Guia De Resolução De Problemas
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Download Required Driver ISO Bundle
Steps to install RHEL 7.0 or CentOS 7.0
Verify
Steps to install RHEL 6.5 or CentOS 6.5
Verify
Post Installation Verification
Related Information
Introduction
This document describes how to install Redhat Enterprise Linux ( RHEL ) or CentOS Linux on the
Cisco Unified Computing System (UCS) M-Series server using local storage.
Cisco Unified Computing System (UCS) M-Series server using local storage.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco UCS Manager 2.5 or 3.1 version
●
Storage Profiles
●
Linux Operating Systems (OS)
●
Components Used
The information in this document is based on UCS M-Series.
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information
Cisco M-Series modular server is one of the Cisco products that represents Composable
Infrastructure design. The modular servers do not have a local storage but a centralized storage
that can be shared by all servers. To access the shared storage, OS requires new Small
Computer System Interface (SCSI) driver called as storage Network Interface Card ( sNIC ) and
Infrastructure design. The modular servers do not have a local storage but a centralized storage
that can be shared by all servers. To access the shared storage, OS requires new Small
Computer System Interface (SCSI) driver called as storage Network Interface Card ( sNIC ) and