Cisco Cisco MDS 9000 NX-OS Software Release 5.2 Guia De Informação

Página de 8
Sun Microsystems, Inc.  
 
  
Sun Microsystems 
 
Page 5 of 8 
 
 
December 7 2009 
Introduction 
 
The purpose of the this document is to provide certification information to personnel that would use 
this as proof of configuration acceptance. The following information will include examples of 
configurations with all equipment identified. Test reports will be provided if necessary but the overall 
status will be provided. This document is not intended to be a standalone document. It should be used 
with the associated documentation to implement a VSM-Cluster configuration with Cisco 
switches/directors. 
Overview 
Cisco 18+4 and 14+2 line cards are the hardware portion of the Cisco channel extension solution for 
the 9222i and 95xx series switches.  Cisco code version 4.2(1b) was tested for interoperability with 
the devices and microcode described in this document
Product and Software 
Equipment used in the test configurations. 
 
Host Mainframe: IBM Z10 with FICON Express4 channels. Host OS: z/OS 1.10 
Application Software: IEBDG, IEBGENER, DFSMS/DSS Backup/Restore, FDR 
Backup/Restore, SyncSort and DFSort 
Library/VSM Control Software: NCS/VTCS 6.2 
Sun Microsystems VSM4 firmware versions D02.08.xx, D02.09.xx with VCF2 Cards. 
Sun Microsystems VSM5 firmware versions D02.08.xx D02.09.xx with VCF4 Cards. 
Cisco 95xx:  v4.2(1b)   
Sun Microsystems 8500 Silo tape libraries with the following tape drives. 
Sun 9840B: Firmware level 1_43_306 
Sun 9840C: Firmware level 
1_44_509
 
Sun 9840D: Firmware level 
1_44_709
 
Sun 9940B: Firmware level 1_43_406 
Sun T10000A: Firmware level 
1_44_106
 
Sun T10000B: Firmware level 
1_44_206
 
GigE WAN interfaces Connected through Anue Network Distance Emulator providing 
distances up to 4800 kilometers. Distances emulated were 200km to 4800km