Cisco Cisco FirePOWER Appliance 7125 Guia Da Instalação
Version 5.3
Sourcefire 3D System Installation Guide
150
Hardware Specifications
Sourcefire 7000 Series Devices
Chapter 6
70xx Family Front Panel
The front panel of the chassis houses LEDs, which display the system’s operating
state. The
state. The
70xx Family Front Panel LEDs
table describes the LEDs on the front
panel.
Front Panel Components
A
Reset button
D
System ID button
B
System status LED
E
Power button and LED
C
Hard drive activity LED
A B C
D
E
70xx Family Front Panel LEDs
LED
D
ESCRIPTION
Reset button
Allows you to reboot the appliance without disconnecting it from the power
supply.
System status
Indicates the system status:
• A green light indicates the system is powered up and operating normally, or
• A green light indicates the system is powered up and operating normally, or
powered down and attached to AC power.
• An amber light indicates a system fault.
See the
See the
70xx Family System Status table
on page 151 for more information.
Hard drive activity
Indicates the hard drive status:
• A blinking green light indicates the fixed disk drive is active.
• A blinking green light indicates the fixed disk drive is active.
• If the light is off, there is no drive activity or the system is powered off.
System ID
When pressed, the ID button displays a blue light, and a blue light is visible at
the rear of the chassis.
Power button and
LED
Indicates whether the appliance has power:
• A green light indicates that the appliance has power and the system is on.
• A green light indicates that the appliance has power and the system is on.
• No light indicates the system is shut down or does not have power.