Cisco Cisco IPICS Release 2.1 Instruções Importantes De Segurança
73
Release Notes for Cisco IPICS Release 2.1(1)
OL-12993-01
Open Caveats for Cisco IPICS - Release 2.1(1)
Component: installer-server
If your server loses connectivity or power during an upgrade, the SSH shell process
terminates and the upgrade does not successfully complete. The steps to resolve this
issue vary depending on the status of the database backup at the time that connectivity
or power was lost.
terminates and the upgrade does not successfully complete. The steps to resolve this
issue vary depending on the status of the database backup at the time that connectivity
or power was lost.
When you install Cisco IPICS from the CD on the Cisco MCS 7825-H1 server, the
CSA installation may output certain warning or memory error messages; these
messages do not affect the operation of the system and you do not need to take any
action.
CSA installation may output certain warning or memory error messages; these
messages do not affect the operation of the system and you do not need to take any
action.
Component: ipphone-interface
When connected to the Cisco IPICS service, the Cisco Unified IP Phone 7960 may
stop receiving and transmitting audio after a period of time. To reconnect to the audio
stream, reselect the channel or VTG from the Cisco IPICS service menu.
stop receiving and transmitting audio after a period of time. To reconnect to the audio
stream, reselect the channel or VTG from the Cisco IPICS service menu.
Component: lmr-interface
Cisco IPICS does not process the value that you enter for the low level guard tone
(LLGT) in the Configuration > Radios window. Instead, you must specify the LLGT
that you need to use in the radio descriptor file.
(LLGT) in the Configuration > Radios window. Instead, you must specify the LLGT
that you need to use in the radio descriptor file.
Component: mp-server
After you upgrade the Cisco IPICS-Mobile Platform from Cisco IPICS release 2.0(2)
SR1 to release 2.1(1), the license file is not recognized. You can resolve this issue by
performing a pre-upgrade or a post-upgrade task.
SR1 to release 2.1(1), the license file is not recognized. You can resolve this issue by
performing a pre-upgrade or a post-upgrade task.
Table 8
Open Caveats for Cisco IPICS Release 2.1(1) (Continued)
Identifier
Headline