Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)
40
Release Notes for Cisco ONS 15454 SDH Release 5.0.6
OL-8285-01
New Features and Functionality
SNMP
CSCeg45934
When NMS sends a query to retrieve E4 Line PM parameters ES, SES, UAS and CV for an E4 interface
on an STM1E12 card, SNMP does not show PM counts for E4 interfaces. On an STM1E12 card, Ports
9-12 can be configured as either STM1 or E4. If any of the ports from 9-12 are configured as E4 and an
SNMP get request is sent to the node to retrieve E4 line PM parameters, SNMP will not show any data
for E4 PM parameters. To avoid this issue, use other management interfaces to query E4 parameters. This
issue is resolved in Release 5.0.2.
on an STM1E12 card, SNMP does not show PM counts for E4 interfaces. On an STM1E12 card, Ports
9-12 can be configured as either STM1 or E4. If any of the ports from 9-12 are configured as E4 and an
SNMP get request is sent to the node to retrieve E4 line PM parameters, SNMP will not show any data
for E4 PM parameters. To avoid this issue, use other management interfaces to query E4 parameters. This
issue is resolved in Release 5.0.2.
CSCec75857
There is no SNMP return value for dsx1TotalTable when you configure an ONS 15454 with DSX 1 day
stats, then query the node. This issue is resolved in Release 5.0.
stats, then query the node. This issue is resolved in Release 5.0.
TL1
CSCeg87471
Do not set the TID for an ENE to more than 19 characters. Setting the TID for an ENE to 20 characters
or more and then issuing a TL1 command on the GNE to execute on the ENE will result in TL1 agent
connectivity issues on the ENE. Specifically, if you set the TID on the ENE to 20 characters, reboot the
TCC, then try to connect to that ENE from a GNE this will result in a loss of TL1 connectivity to the
GNE. This issue is resolved in Release 5.0.2.
or more and then issuing a TL1 command on the GNE to execute on the ENE will result in TL1 agent
connectivity issues on the ENE. Specifically, if you set the TID on the ENE to 20 characters, reboot the
TCC, then try to connect to that ENE from a GNE this will result in a loss of TL1 connectivity to the
GNE. This issue is resolved in Release 5.0.2.
New Features and Functionality
This section highlights new features and functionality for Releases 5.0.x. (Release 4.7 features are also
included for ease of access.) For detailed documentation of each of these features, consult the user
documentation.
included for ease of access.) For detailed documentation of each of these features, consult the user
documentation.
New Hardware
TCC2P Card
The Advanced Timing, Communications, and Control Plus (TCC2P) card is an enhanced version of the
TCC2 card. The primary enhancements are Ethernet security features and 64K composite clock BITS
timing (SONET only).
TCC2 card. The primary enhancements are Ethernet security features and 64K composite clock BITS
timing (SONET only).
The TCC2P card performs system initialization, provisioning, alarm reporting, maintenance,
diagnostics, IP address detection/resolution, SONET SOH DCC/GCC termination, and system fault
detection for the ONS 15454. The TCC2P also ensures that the system maintains Stratum 3 (Telcordia
GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
diagnostics, IP address detection/resolution, SONET SOH DCC/GCC termination, and system fault
detection for the ONS 15454. The TCC2P also ensures that the system maintains Stratum 3 (Telcordia
GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
The TCC2P card requires Software Release 4.0 or later.