Cisco Cisco VC220 Dome Network Camera Manual De Manutenção
Troubleshooting
Questions and Answers
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
103
A
Q.
How do I set up UPnP so my cameras broadcast their availability to my
network?
network?
UPnP networking technology provides automatic IP configuration and
dynamic discovery of devices added to a network. Services and
capabilities offered by networked devices, such as printing and file sharing,
are available among each other without a lot of network configuration.
dynamic discovery of devices added to a network. Services and
capabilities offered by networked devices, such as printing and file sharing,
are available among each other without a lot of network configuration.
UPnP Is automatically enabled on the cameras. In a Windows environment,
it may or may not be enabled. On Windows XP, you must log on to the
computer as a system administrator to install the UPnP components. If using
Windows Vista, UPnP Is enabled by default. However, if it is not enabled,
turn off UAC (User Access Control) before following this procedure.
it may or may not be enabled. On Windows XP, you must log on to the
computer as a system administrator to install the UPnP components. If using
Windows Vista, UPnP Is enabled by default. However, if it is not enabled,
turn off UAC (User Access Control) before following this procedure.
Follow these steps to enable UPnP user interface on your computer:
STEP 1
Go to Start, click Control Panel, and then click Add or Remove Programs.
STEP 2
In the Add or Remove Programs dialog box, click Add/Remove Windows
Components.
Components.
NOTE
If the default ports are already used by another device connecting to the same
router, the camera will select another port.
router, the camera will select another port.
STEP 3
In the Windows Components Wizard dialog box, make sure Networking Services
is checked.
is checked.
STEP 4
Highlight Networking Services, and then click Details.
STEP 5
In the Networking Services dialog box, select Universal Plug and Play and then
click OK.
click OK.
STEP 6
Click Next in the following window.
STEP 7
Click Finish. UPnP is enabled.
NOTE
Another way to enable UPnP on Windows XP is to go to My Network Places and
on the left tab click on Show icons for networked UPnP devices.
on the left tab click on Show icons for networked UPnP devices.