Cisco Cisco Unified MeetingPlace Audio Server Guia Da Instalação
Cisco MeetingServer 5.1 Installation Planning Guide
61
Cisco Systems
March 2003
System
Description
9
9
9
9
using multiple TCP ports.
The Windows server must be able to open a TCP
connection on port 5003 when connecting to a
MeetingPlace IP conference server.
connection on port 5003 when connecting to a
MeetingPlace IP conference server.
The secondary Ethernet connections on MeetingPlace
must be connected to the same subnet as your corporate
network where your IP phone is connected.
must be connected to the same subnet as your corporate
network where your IP phone is connected.
Note: For optimal voice quality, it is strongly recommended
that all IP Access Blade connections be 100Base-TX
Ethernet.
that all IP Access Blade connections be 100Base-TX
Ethernet.
From the MeetingPlace IP Gateway standpoint, the IP
address of the MeetingPlace conference server must not
be translated using a Network Address Translation
routing scheme.
address of the MeetingPlace conference server must not
be translated using a Network Address Translation
routing scheme.
Connectivity between the MeetingPlace IP Gateway
Windows server and the MeetingPlace conference server
must be high quality and not subject to interruptions due
to traffic congestion. Any time the round trip latency
exceeds 100ms or there is more than 1% packet loss, a
noticeable reduction in service quality should be
expected.
Windows server and the MeetingPlace conference server
must be high quality and not subject to interruptions due
to traffic congestion. Any time the round trip latency
exceeds 100ms or there is more than 1% packet loss, a
noticeable reduction in service quality should be
expected.
5.
End User
Requirements
Requirements
IP phone that supports G.711 and is configured to work
with Cisco CallManager or PSTN phone through a voice
enabled router or NetMeeting.
with Cisco CallManager or PSTN phone through a voice
enabled router or NetMeeting.
Note: If you use Microsoft NetMeeting , version 3.0 or later
is required and it must support G.711.
is required and it must support G.711.