Cisco Cisco Unified MeetingPlace Audio Server Manual De Manutenção
Managing 4-5
February 27, 2004
Cisco MeetingPlace Audio Server System Manager’s Guide
Configuring port groups
Because multiple ports may use identical settings, the MeetingPlace database
uses port groups to define the settings for multiple ports simultaneously. You
define a port group by selecting the Port Groups topic in the Configure tab.
uses port groups to define the settings for multiple ports simultaneously. You
define a port group by selecting the Port Groups topic in the Configure tab.
Some information for individual ports is included in the port group definition.
You do not have to provide this information twice when a port is a member of
a port group. (Group information has precedence over individual port
information.)
You do not have to provide this information twice when a port is a member of
a port group. (Group information has precedence over individual port
information.)
The configuration information you enter to define a port group, which
includes a port access type, applies by default to all ports that are assigned to
the group in the absence of individual port configuration information or a DID
access plan. The following table explains the port groups.
includes a port access type, applies by default to all ports that are assigned to
the group in the absence of individual port configuration information or a DID
access plan. The following table explains the port groups.
Attribute
Description
Choices/Recommendations
ID number
A number from 0 to 31 that identifies
this port group. This number is
predefined.
this port group. This number is
predefined.
Assign every line coming into
MeetingPlace to a port group. The port
group ID number is your choice.
MeetingPlace to a port group. The port
group ID number is your choice.
Active
Whether to use this port group
definition. You may want to define port
groups now for later use.
definition. You may want to define port
groups now for later use.
Yes or No
Most likely, port groups are always
active. You may wish to make port
groups inactive during servicing.
active. You may wish to make port
groups inactive during servicing.
Provider
An abbreviation that identifies the
service provider.
service provider.
Alpha, Numeric, or Both
Circuit ID
A number that identifies the circuit.
Assigned by the circuit provider
Configuring MeetingPlace port groups