Cisco Cisco Packet Data Gateway (PDG)

Página de 467
P-GW CDR Field Descriptions   
▀  CDR Fields 
 
 
▄  GTPP Interface Administration and Reference, StarOS Release 19 
260 
   
bit 4..1 : numbering plan indicator
 
= 0001: ISDN/Telephony Numbering Plan (Rec CCITT E.164)
 
other : not relevant
 
 
octet 2..9: <= 16 digits TBCD-String (twisted)
 
substructure (without spares or fillers):
 
1..3 digits - country code (CC)
 
(only international number)
 
3 digits - national destination code (NDC)
 
<= 10 digits - subscriber number (SN)
 
first and intermediate octet = 2 digits
 
last octet = 2 digits or 1 digit + 1 fill digit H'F
 
 
As per 3GPP TS 29.274 v 8.11.0, “MSISDN value contains only the actual MSISDN number (does not contain the 
‘nature of address indicator’ octet, which indicates ‘international number’ as in 3GPP TS 29.002 [37]) and is encoded 
as TBCD digits.”
 
To comply with this, octet 1 (nature of address indicator) is not added in the encoded value of MSISDN.
 
 
For example:
 
MSISDN: '491720400305'
 
encoded: H'94 71 02 04 30 50
 
Format 
BCD encoded octet string.
 
Length 
1–9 bytes
 
Served PDP PDN Address 
This field contains the IP address for the PDN connection (PDP context, IP-CAN bearer). This is a network layer address of 
type IP version 4 (PDN Type is IPv4) or IP version 6 (PDN Type is IPv6 or IPv4v6). The address for each Bearer type is 
allocated either temporarily or permanently (see “Dynamic Address Flag”). This parameter shall be present except when both 
the Bearer type is PPP and dynamic address assignment is used.
 
Format 
Octet string
 
Length 
The length can vary based on whether the encoded IP address is IPv4 or IPv6.