Cisco Cisco Packet Data Gateway (PDG)
S-GW CDR Field Descriptions
▀ CDR Fields
▄ GTPP Interface Administration and Reference, StarOS Release 19
418
16 bytes
Served PDP PDN Address Extension
This field contains the IPv4 address for the PDN connection (PDP context, IP-CAN bearer) when dual-stack IPv4v6 is used,
and the IPv6 address is included in Served PDP Address or Served PDP PDN Address.
and the IPv6 address is included in Served PDP Address or Served PDP PDN Address.
This field is not included if the PDP/PDN address is IPv4 or IPv6. By default, this field is not sent, even if the PDP
Type is IPv4v6; this field must be enabled using the
Type is IPv4v6; this field must be enabled using the
gtpp attribute served-pdp-pdn-address-extension
CLI command.
Important:
Note that this field is not part of the 3GPP 32.298 Release 6 and 7 specifications. This field is an
Rel.9 attribute and it can be present in Rel.7 or Rel.8 dictionary if enabled through the
gtpp attribute served-
pdp-pdn-address-extension
CLI command.
Format
Octet string
Length
8 bytes
PDP IP Address
This field contains the IP address for the PDP context.
Format
IP address
Length
The length can vary based on whether the encoded IP address is IPv4 or IPv6.
PDP IPv4 Binary Address
The octet string included in the field described above includes the IPv4 address of the P-GW in binary
coding.
coding.
Format
Octet string
Length
4 bytes
Serving Node PLMN Identifier
This field denotes the PLMN identifier (MCC and MNC) of the P-GW used. This field is present in CDRs if the P-GW
PLMN-ID is available in the CSR message from Serving Node (MME).
PLMN-ID is available in the CSR message from Serving Node (MME).
The MCC and MNC are coded as described for “Routing Area Identity” in TS 29.060.
Format
Octet string