Cisco Cisco TelePresence MX700 Manual De Manutenção
D14850.03 MX Series Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
66
AdministrAtor guide
Video Output LCD [1] MonitorRole
Set the LCD monitor role.
It is highly recommended to use the default setting. NOTE: The settings made here will be
It is highly recommended to use the default setting. NOTE: The settings made here will be
overruled by the touch controller.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly/InternalSetup>
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly/InternalSetup>
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
InternalSetup: Internal setup from the touch controller will be used.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
InternalSetup: Internal setup from the touch controller will be used.
Example: Video Output LCD 1 MonitorRole: InternalSetup
Video Output LCD [1] Brightness
Set the brightness level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Brightness: 50
Video Output LCD [1] Red
Set the Red color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Red: 50
Video Output LCD [1] Green
Set the Green color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Green: 50
Video Output LCD [1] Blue
Set the Blue color level for the monitor.
Requires user role: ADMIN
Value space: <S: 0, 100>
Requires user role: ADMIN
Value space: <S: 0, 100>
Range: Select a value from 0 to 100.
Example: Video Output LCD 1 Blue: 50
Video Output Internal [2] MonitorRole
Determine the role of the internal monitor and select where to show the video stream and
presentation.
It is highly recommended to use the default setting.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
It is highly recommended to use the default setting.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
First: Show the main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Example: Video Output Internal 2: First
Video Selfview
Determine if the main video source (selfview) shall be displayed on screen.
Requires user role: USER
Value space: <On/Off>
Requires user role: USER
Value space: <On/Off>
On: Display selfview on screen.
Off: Do not display selfview on screen.
Off: Do not display selfview on screen.
Example: Video Selfview: On
Video WallPaper
Select a background image for the video screen when idle. A corresponding background image
will be applied to the Touch controller.
Requires user role: USER
Value space: <None/Growing/Summersky/Custom/Wallpaper01/Wallpaper02/
Wallpaper03/Wallpaper04/Wallpaper05/Wallpaper06/Wallpaper07/Wallpaper08/
Requires user role: USER
Value space: <None/Growing/Summersky/Custom/Wallpaper01/Wallpaper02/
Wallpaper03/Wallpaper04/Wallpaper05/Wallpaper06/Wallpaper07/Wallpaper08/
Wallpaper09/Wallpaper10/Wallpaper11/Wallpaper12>
None: There will not be a background image on the screen.
Summersky, Growing, Waves: The selected background image will be shown on the video
Summersky, Growing, Waves: The selected background image will be shown on the video
screen.
Wallpaper01 to Wallpaper12: The selected background image will be shown on both the
Wallpaper01 to Wallpaper12: The selected background image will be shown on both the
video screen and the Touch controller.
Custom: If a custom wallpaper is uploaded to the system, it will be used as background
Custom: If a custom wallpaper is uploaded to the system, it will be used as background
image on the screen. If not, there will be no background image.
Use the web interface to upload a custom wallpaper to the video system.
EX/MX: 1) On the touch controller: Tap More > Settings > System Information to find the IP
Use the web interface to upload a custom wallpaper to the video system.
EX/MX: 1) On the touch controller: Tap More > Settings > System Information to find the IP
address of the video system.
2) On your computer: Open a web browser and enter the IP address of the codec in the
2) On your computer: Open a web browser and enter the IP address of the codec in the
address bar. Hover the mouse over the Configuration tab and select "Wallpaper". Browse for
the file and press the "Upload" button. The maximum supported resolution is 1920x1200.
Example: Video Wallpaper: Wallpaper01
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Advanced settings