Cisco Cisco BPX 8600 Modules Guia De Resolução De Problemas
Understanding BXM Card Error ST Err: OBJ ID:30
Err:0x00000001
Err:0x00000001
Document ID: 10825
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Error Explanation
Error Output
Problem Solution
Related Information
Prerequisites
Requirements
Components Used
Conventions
Error Explanation
Error Output
Problem Solution
Related Information
Introduction
This document explains the
ST Err: OBJ ID:30 Err:0x00000001
error, a nonfatal hardware card
error that can occur with BXM cards in a BPX switch.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco BPX 8600 Modules
•
Cisco BPX 8600 Series Switches
•
Cisco BPX/IGX/IPX WAN Software
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Error Explanation
The wide−area network (WAN) switch software incorporates diagnostic and self−test routines in order to
monitor a node for proper operation and hardware availability. Self−tests run on all standby cards in order to
ensure hardware and firmware reliability.
monitor a node for proper operation and hardware availability. Self−tests run on all standby cards in order to
ensure hardware and firmware reliability.