Cisco Cisco C880 M4 Server Guia Da Instalação
41
CA92344-0879-01
Table 8.2.2-1
Item
Setting values
URL
http://<Maintenance IP Address>:<http port#> or
https://<Maintenance IP Address>:<https port#>
This depends on the system configuration.
http port#:Default(8081)
https port#:Default(432)
Username
Account username
Password
Account password
(3) Enter Maintenance Mode.
”.
(4) Confirm the mounting locations of the PSUs. See table 8.2.2-2.
(5) Remove FAN units at the mounting locations of PSUs.
See Appendix C.11, “FANU
”.
Do not remove more than a FAN unit at the same time.
(7) Install the power cable to the main unit. See Table 8.2.2-2.
Table 8.2.2-2
Unit type
Power Supply configuration
Refer to
"Input Power Systems"
Cisco C880 M4
200V
Non-redundant power supply
200V
Redundant power supply
200V
Dual power feed
(8) Turn on AC power of the added PSUs.
(9) Navigation Bar [System] → Click on Sub Menu [System Setup].
→
The window shown in “System Setup” appears.
(10) Change the appropriate radio buttons under [Power Feed Mode] and [PSU Redundant Mode].
See Appendix B.7, “Redundant Power Supply and Dual Power Feed Configuration
”.
(11) Change Maintenance Mode disabled. See Appendix B.1.2,” Disabling maintenance mode
”.