Cisco Cisco Prime Infrastructure 2.1

Deploying the flat mobility architecture on Cisco 5508 and WiSM2 would be supported only in 
classic view and entire wireless configuration would be left as it is in classic and LifeCycle view.

For more information about the new mobility functionality on Cisco WLC, see the Hierarchical 
Mobility (New Mobility) the Cisco Wireless LAN Controllers and Lightweight Access Points for 
Release 7.3.112.0 Release Notes at:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn7_3_112_0.html#wp10
54557

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/data_sheet_c
78-729449.html

Prime Infrastructure 2.1 enables you to manage Cisco WLC Releases 7.5.102.0 and 7.6.100.0 with the 
features of Cisco WLC 7.4.121.0 and earlier releases. Prime Infrastructure 2.1 does not support any 
features that are introduced in Cisco WLC Releases 7.5.102.0 and 7.6.100.0 except the new access point 
platforms and the new mobility feature. Prime Infrastructure 2.1 supports the following access points.

Cisco Aironet 3700 Series Access Points are supported. For more information, see

.

Cisco Aironet 3700p Series Access Points, which are dual-band Cisco WLC-based 
802.11a/g/n/ac APs for high-density environments, with narrow beam width and high-gain 
antennas, are supported. Heat map is generated for all the supported antennas of 3700P 
access point.

3700I/E

3700P

Cisco AP3600 with 802.11ac

702 I

Cisco Aironet 1530 Series Outdoor Access Points are supported. For more information, see

.

1530I/E

3600P

Cisco Aironet 3600 Series Access Points are supported with 802.11ac module.