Cisco Cisco UCS C22 M3 Rack Server Guia De Resolução De Problemas
Contents
Introduction
Prerequisites
Requirements
Components Used
Expected Output for Different Reboot Conditions
Reboot from OS (vSphere 5.0)
Power Cycle from CIMC User Interface
Power Off from CIMC User Interface
Power On from CIMC User Interface
Power Button on Front of Server (OFF)
Power Button on Front of Server (ON)
Introduction
This document provides output from /var/log/messages (also found in the Onboard Failure
Logging (OBFL) log) for a C210-M2 that depicts the expected output during different reboot
conditions. When you troubleshoot Cisco Unified Computing System (UCS) C-Series server boot
issues, one place to start is the /var/log/messages and OBFL logs. These logs are located in the
tech support files.
Logging (OBFL) log) for a C210-M2 that depicts the expected output during different reboot
conditions. When you troubleshoot Cisco Unified Computing System (UCS) C-Series server boot
issues, one place to start is the /var/log/messages and OBFL logs. These logs are located in the
tech support files.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
VMware vSphere 5.0
●
Cisco Integrated Management Controller (CIMC)
●
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Expected Output for Different Reboot Conditions
Reboot from OS (vSphere 5.0)
Notes: